Frequency Converter REOVIB MFS 368
IP54 or IP20 FREQUENCY CONVERTER REOVIB MFS 368 More technology in the same design – that’s the motto of the new REOVIB MFS 368. The new devices consume up to 45% less power, which not only results in a better energy balance, but also lowers operating costs. This is achieved by compensating for reactive power. The lower energy consumption has a positive impact on the environment by reducing CO₂ emissions. Additionally, the frequency converters for vibratory feeder technology feature a wide input voltage range of 99 V to 264 V, while maintaining a constant output voltage of max. 205 V. They also enable the vibratory feeder to operate at an optimal vibration frequency for the conveyed material, making it entirely independent of the mains power supply frequency. This allows the device to be used worldwide. Where previously multiple different feeders or magnets were required, a single REOVIB MFS 368 is now sufficient. In addition, it is possible to automatically determine the resonance frequency of the vibratory system and to implement control of the vibration amplitude to constant values using the ACC control method developed by REO. The advantage here is that the feeder automatically operates with optimum conveying performance regardless of the load or mechanical setting. This eliminates the need for complex adjustments to the feeder. With the new REOVIB MFS 368, you also always get optimum and maximum feeder performance, e.g. when the springs age, the mechanical load changes, or the voltage fluctuates. The new converter has an integrated active mains filter, which saves additional costs for an external mains filter and reduces the power consumption, as well as an LCD display with plain text display. A temperature sensor for magnets can optionally be connected, which ensures that there are no failures due to defective magnets. This increases the operational reliability of the systems. The devices can optionally be equipped with fieldbus interfaces and are optionally available as versions with UL/CSA certification. This enables uncomplicated use without effort and tests in systems in the USA and Canada. The devices in the REOVIB MFS 368 series are available with a max. output current of 3 A, 6 A, 8 A and as IP20 control cabinet installation versions as well as IP54 housing versions. The IP54 housings can be supplied with various connection options: Input cable/output cable Input cable/output socket Completely pluggable with input connector, output socket and sensor and actuator connectors Benefits Reduction of harmonics and thus of mains feedback Improved energy efficiency through reactive power compensation Active power is drawn from the supply network Output voltage 205 V with an input voltage range of 99 V to 264 V LCD display and plain text menu control Short circuit detection Output current limitation Optional connection for thermal contact for magnet temperature monitoring Additional 24 V valve output as an option Replaceable fieldbus interface The communication interface can be configured according to your needs Die Produkt-Highlights im Video Informieren Sie sich im aktuellen Produkt-Video über die innovativen Funktionen und die hohe Leistungsfähigkeit des MFS 368. Typical applications Feed & assembly automation, screening technology, filling & packaging technology Technical data Input voltage 99 V … 264 V Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 0…205 V Output current max. 3 A / 6 A / 8 A Oscillation frequency 20 … 140 Hz *¹ Set point specification LCD Display, 0 … 10 V, 0 (4) … 20 mA Status signal Relay changeover 24 V, 1A Brake signal Relay changeover 24 V, 1A Ext. release 24 V DC, switch Valve output 24 V, 100 mA Sensor supply 24 V DC Umin/ Umax setting LCD Display Soft start adjustable 0…60 sec. Soft stop adjustable 0…60 sec. Fill level control/ Backflow circuit PNP, 24 V DC Coarse/fine control ✓ Amplitude control ✓ Resonance frequency search ✓ Resonance frequency control ✓ Selectable clock mode ✓ Sensor – Time Out control * ✓ Mains voltage compensation ✓ Short circuit detection ✓ Output current limitation ✓ Connection for thermal contact for magnetic temperature monitoring (option) ✓ Additional 24 V valve output *¹ ✓ Fieldbus interface ProfiNet, EtherNet/IP, EtherCat, Profibus-DP, CAN-Bus, DeviceNet, Conformity CE, RoHS, UL optional Protection classes IP20, IP54 Ambient temperature 0…40°C * For IP54 *¹ Other frequencies on request Data sheet All data and configurations can be found in our product data sheet. Download data sheet Certification Interfaces
AC Magnets REOVIB WI 721
Powder-coated version Description Powder-coated version, fully encapsulated at 900 1/min, 1500 1/min, 3000 1/min or 6000 1/min, power ratings up to 3900 VA Mounting via threaded holes on the base and armature surface Cable version downwards with unshielded or shielded cables The use of a new coating technology allows us to design the vibrating magnet to be smaller in the WI 721 series. This results in significant savings in terms of weight, material and installation space. This optimized surface coating also ensures a consistently high performance, without the usual performance losses that can occur with other systems. The advantages of this new coating are numerous: Use in the pharmaceutical industry Use in the food processing industry with FDA conformity Corrosion protection High temperature resistance Non-flammable Cold resistant Homogeneous coating Solvent resistance High abrasion resistance Thanks to these properties, the WI 721 series is ideally suited for demanding applications, especially in environments that require high standards of hygiene, durability and performance. Benefits Corrosion protection through powder coating FDA-compliant (Food and Drug Administration) Optimum size/performance ratio Good adjustability Power ratings up to 3900 VA Also for low-frequency applications Peak tractive force up to 6900 N Flat designs Typical applications Packaging and weighing industry for feeding and sorting processes, automation processes using drives with vibrating magnets, particularly suitable for the food and pharmaceutical industries (FDA-compliant) Technical data Types Max. nominal air gap[mm] Power at 6000 1/min [VA] Nominal current=thermal nominal current at 230V [A] Peak tractive force at nominal air gap [N] Power at 3000 1/min [VA] therm. Nominal current at 230V [A] Peak tractive force at nominal air gap [N] Weight magnet [kg] Weight armature [kg] REOVIB WI 721/10 2,5 320 1,4 230 280 1,2 229 2,1 0,34 REOVIB WI 721/12 3 450 1,95 330 425 1,85 318 2,8 0,62 REOVIB WI 721/14 3 1200 5,2 850 1200 5,2 1410 6,9 1,45 REOVIB WI 721/16 3 2200 9,5 1590 1890 8,2 2620 10,5 2,6 REOVIB WI 721/18 3 – – – 3900 16,9 6900 28 9 Dimensions in mm Types a b c d f1 f2 f3 g h i p r REOVIB WI 721/10 100 68 67 – 62,5 12,5 9 67 39 18,5 30 M6 REOVIB WI 721/12 100 100 67 40 62,5 15,5 9 67 71 18,5 30 M6 REOVIB WI 721/14 155 110 109 – 91,5 23,5 15 109 69 27,5 50 M10 REOVIB WI 721/16 155 168 109 80 91,5 23,5 15 109 127 27,5 50 M10 REOVIB WI 721/18 230 170 170 65 129,5 42,5 18 170 121 48,5 75 M12 Certifications
REOVIB SMART SYSTEM MINI Phase-Angle Control
IP00, for mounting on DIN rail Description REOVIB SMART SYSTEM MINI BASIC MODULE In open design for mounting on a DIN rail with an output channel of max. 1 A. The basic module has a supply for expansion modules. This allows further output modules to be connected in series up to a total current of 10 A. REOVIB SMART SYSTEM MINI EXPANSION MODULE In open design for mounting on a DIN rail. The expansion module has 1 output channel with max. 1 A and can be set up together with the basic module and several expansion modules. Benefits Cost-effective Phase-Angle Controls with the most important functions can be used as a stand-alone device or modular version for multiple outputs Output current up to 6 A DIN rail mounting Versions with fill level control/backlog control available Typical applications Weighing systems, multi-head weighing machines, feeding & assembly automation, sorting systems Technical data Types SMART mini basic module SMART mini expansion module Mains input 110/230 V automatic detection via SMART mini basic module Mains frequency 50 / 60 Hz +/- 3 Hz via SMART mini basic module Output voltage 20 … 100V/ 40…210 V 20 … 100V/ 40…210 V Output current max. 1 A max. 1 A Vibration frequency 50 … 100 Hz (60 / 120 Hz) 50 … 100 Hz (60 / 120 Hz) Set point setting Potentiometer, 0 … 10 V, 0 (4) … 20 mA Potentiometer, 0 … 10 V, 0 (4) … 20 mA Ext. enable 24 V DC, switch 24 V DC, switch U min / U max internal potentiometer internal potentiometer Soft start fixed defined fixed defined Max. output current of all outputs 10 A – Fill level control / Backlog control – – Conformity CE, RoHS CE, RoHS Protection class IP00 IP00 Data sheet All data and configurations can be found in our product data sheet. Download data sheet Certifications
Phase-angle Control REOVIB SMART 6a
IP54 or IP20 Description The REOVIB SMART series includes phase-angle control devices for use in vibratory conveying applications. The devices offer the most important functions for use in Vibratory feeder technology and thus represent a cost-effective way to control vibratory feeders – and all this in a high-quality design. The devices are available in various protection classes – as a control cabinet installation module in IP20 or as a housing variant in IP54 for direct mounting on the application. The housing variants with protection class IP54 are available in different versions: Input cable/output cable Input cable/output socket fully pluggable with input plug and output socket. The REOVIB SMART ATS 100 devices are available as IP54 housing versions with output currents up to 15 A and are UL-listed. Benefits cost-effective Phase-Angle Controls with the most important functions IP54 version for direct mounting on the application or IP20 version for control cabinet installation Versions with UL approval (SMART ATS 100) available Output current up to 6 A Typical applications Feeding & assembly automation, screening technology, filling & packaging technology Technical data Input voltage 110/ 230 V switchable Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 20 … 100V/ 40…210 V Output current max. 6A Vibration frequency 50Hz 50 Hz / 100 Hz Vibration frequency 60Hz 60 Hz / 120 Hz Setpoint input Potentiometer, 0 … 10 V, 0 … 20 mA Ext. Enable 24 V DC, switch Umin/ Umax setting internal potentiometers Soft start fixed defined Mains voltage compensation – Conformity CE, RoHS Protection class IP20/ IP54 Ambient temperature 0…45°C Data sheet All data and configurations can be found in our product data sheet. Download data sheet Certifications Optional UL-certified
REOVIB SMART-MIC Phase-Angle Control Unit
IP54 or IP20 Description Thanks to the newly installed LED display, precise values can be set the same way every time, unlike the previous model. This results in more precise settings and easier traceability of the inputs. Thanks to the connection to Industry 4.0 and the IIoT-Ready, the REOVIB SMART-MIC already secures the possibilities for the communication technology of the future. Just like the previous devices, the devices in the REOVIB SMART-MIC series are available in various protection classes – as a control cabinet installation module in IP20 or as a housing variant in IP54 for direct mounting on the application. The housing variants with protection class IP54 are available in different versions: Input cable/output cable Input cable/output socket Completely pluggable with input plug and output socket In addition to the functions and advantages of the REOVIB SMART series, the control unit has mains voltage compensation for constant amplitude and an adjustable soft start ramp time. Benefits LED display Mains voltage compensation IP54 version for direct mounting on the application or IP20 version for control cabinet installation Output current up to 6 A Typical applications Feed & assembly automation, sorting systems Technical data Input voltage 110/ 230 V switchable Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 20 … 100V/ 40…210 V Output current max. 6A Vibration frequency 50Hz 50 Hz / 100 Hz Vibration frequency 60Hz 60 Hz / 120 Hz Set point specification LED display,0 … 10 V, 0 (4) … 20 mA* Ext. enable 24 V DC, switch Umin/ Umax setting LED display (IP54) / potentiometer (IP20) Soft start adjustable 0…60 sec. Mains voltage compensation ✓ Conformity CE, RoHS Protection class IP20/ IP54 Ambient temperature 0…40°C * Optional for IP54 Data sheet All data and configurations can be found in our product data sheet. Download data sheet Certifications
Frequency Converter REOVIB MFS 158
IP54 or IP20 Description The frequency converter for vibratory feeding technology in the REOVIB MFS 158 series offers the option of operating the vibratory feeder at an oscillation frequency that is optimal for the material being conveyed – completely independent of the frequency of the supplying electrical network. The devices in the REOVIB MFS 158 series are available with a max. output current of 4 A and as IP20 – control cabinet installation variants as well as IP54 – housing versions. The IP54 housings are available with various connection options: Input cable/output cable Input cable/output socket Completely pluggable with input connector and sensor sockets Benefits Cost-effective frequency control device with the most important basic functions Frequency control device for controlling a vibratory feeder independently of the electrical frequency of the supplying network Adjustable conveying frequencies between 35…140 Hz Mains voltage compensation for constant vibration amplitude all settings possible using the integrated display sinusoidal output current can be used on 110 V or 240 V networks without switching Storage of user settings possible Fill level control/backlog control Versions available in various protection classes and connection variants Technical data Mains input 110/230 V autom. detection Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 0 … 100V/ 0…205 V Output current max. 4 A Oscillation frequency 35 … 140 Hz Set point specification Display, potentiometer, 0 … 10 V, 0 (4) … 20 mA Status signal Relay changeover 250 V, 1 A Ext. enable 24 V DC, switch Sensor supply 24 V DC Umin/ Umax setting Display Soft start adjustable 0…4 sec. Fill level control/ Backlog control PNP, 24 V DC (Option) Coarse/fine control ✓(Option) Vibration amplitude control – Resonance frequency search – Mains voltage compensation ✓ Conformity CE, RoHS Protection class IP20/ IP54 Data sheet All data and configurations can be found in our product data sheet. https://reo.de/wp-content/uploads/2024/07/FREQUENZUMRICHTER-REOVIB-MFS-158.pdf> Certifications
Frequency Converter REOVIB MFS 368
IP54 or IP20 FREQUENCY CONVERTER REOVIB MFS 368 More technology in the same design – that’s the motto of the new REOVIB MFS 368. The new devices consume up to 45% less power, which not only results in a better energy balance, but also lowers operating costs. This is achieved by compensating for reactive power. The lower energy consumption has a positive impact on the environment by reducing CO₂ emissions. Additionally, the frequency converters for vibratory feeder technology feature a wide input voltage range of 99 V to 264 V, while maintaining a constant output voltage of max. 205 V. They also enable the vibratory feeder to operate at an optimal vibration frequency for the conveyed material, making it entirely independent of the mains power supply frequency. This allows the device to be used worldwide. Where previously multiple different feeders or magnets were required, a single REOVIB MFS 368 is now sufficient. In addition, it is possible to automatically determine the resonance frequency of the vibratory system and to implement control of the vibration amplitude to constant values using the ACC control method developed by REO. The advantage here is that the feeder automatically operates with optimum conveying performance regardless of the load or mechanical setting. This eliminates the need for complex adjustments to the feeder. With the new REOVIB MFS 368, you also always get optimum and maximum feeder performance, e.g. when the springs age, the mechanical load changes, or the voltage fluctuates. The new converter has an integrated active mains filter, which saves additional costs for an external mains filter and reduces the power consumption, as well as an LCD display with plain text display. A temperature sensor for magnets can optionally be connected, which ensures that there are no failures due to defective magnets. This increases the operational reliability of the systems. The devices can optionally be equipped with fieldbus interfaces and are optionally available as versions with UL/CSA certification. This enables uncomplicated use without effort and tests in systems in the USA and Canada. The devices in the REOVIB MFS 368 series are available with a max. output current of 3 A, 6 A, 8 A and as IP20 control cabinet installation versions as well as IP54 housing versions. The IP54 housings can be supplied with various connection options: Input cable/output cable Input cable/output socket Completely pluggable with input connector, output socket and sensor and actuator connectors Benefits Reduction of harmonics and thus of mains feedback Improved energy efficiency through reactive power compensation Active power is drawn from the supply network Output voltage 205 V with an input voltage range of 99 V to 264 V LCD display and plain text menu control Short circuit detection Output current limitation Optional connection for thermal contact for magnet temperature monitoring Additional 24 V valve output as an option Replaceable fieldbus interface The communication interface can be configured according to your needs Typical applications Feed & assembly automation, screening technology, filling & packaging technology Technical data Input voltage 99 V … 264 V Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 0…205 V Output current max. 3 A / 6 A / 8 A Oscillation frequency 20 … 140 Hz *¹ Set point specification LCD Display, 0 … 10 V, 0 (4) … 20 mA Status signal Relay changeover 24 V, 1A Brake signal Relay changeover 24 V, 1A Ext. release 24 V DC, switch Valve output 24 V, 100 mA Sensor supply 24 V DC Umin/ Umax setting LCD Display Soft start adjustable 0…60 sec. Soft stop adjustable 0…60 sec. Fill level control/ Backflow circuit PNP, 24 V DC Coarse/fine control ✓ Amplitude control ✓ Resonance frequency search ✓ Resonance frequency control ✓ Selectable clock mode ✓ Sensor – Time Out control * ✓ Mains voltage compensation ✓ Short circuit detection ✓ Output current limitation ✓ Connection for thermal contact for magnetic temperature monitoring (option) ✓ Additional 24 V valve output *¹ ✓ Fieldbus interface ProfiNet, EtherNet/IP, EtherCat, Profibus-DP, CAN-Bus, DeviceNet, Conformity CE, RoHS, UL optional Protection classes IP20, IP54 Ambient temperature 0…40°C * For IP54 *¹ Other frequencies on request Data sheet All data and configurations can be found in our product data sheet. Download data sheet Certification Interfaces
3-Phase Power Controller REOTRON MDW 700
3-phase thyristor power controller Description REOTRON MDW Power Controllers are used in industrial process engineering and especially in thermal systems. The thyristor controllers are available as phase angle controllers and with burst firing control and have internal voltage, current, and power controllers – so the output power remains stable even under high demands. The devices can operate both directly on the load to be controlled (e.g. in infrared heaters) and as primary controllers of Transformers for voltage adjustment and safe isolation (e.g. in graphite heating elements). Thyristor controllers of the REOTRON MDW series (3 controlled phases) are modern microprocessor-controlled devices with integrated measuring devices for the actual values of voltage and current transformers. Outputs (actual value monitor) with 0…+10V, DC are available for processing the actual values in external system components. Communication with the devices can take place via analog interfaces 0… +10 V, DC, 0(4)… 20 mA, potentiometers or field bus systems Profibus-DP, CAN bus, DeviceNet, EtherNet/IP, ProfiNet and EtherCAT, thus enabling integration into existing bus systems. The devices can be adapted to the respective load conditions via internally adjustable parameters Umax, Imax, Pmax as well as ramp-up ramp and ramp-down ramp. The REOTRON MDW 700 thyristor controllers are designed as switch cabinet installation devices with protection class IP 20 for mounting on a mounting plate. The cooling type is air cooling, fans are integrated from 150 A. The devices in the REOTRON MDW-WK series are designed for water cooling and can be easily integrated into an existing water circuit. Benefits phase-angle or burst-fire controllers measuring of effective values connection via analog interfaces, potentiometers or field bus systems Air or water- cooling installation device for control cabinets Technical data REOTRON MDW 700-10 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 10 A REOTRON MDW 700-25 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 25 A REOTRON MDW 700-50 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 50 A REOTRON MDW 700-80 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 80 A REOTRON MDW 700-110 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 110 A REOTRON MDW 700-150 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 150 A REOTRON MDW 700-200 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 200 A REOTRON MDW 700-300 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 300 A REOTRON MDW 700-115* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 115 A REOTRON MDW 700-160* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 160 A REOTRON MDW 700-250* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 250 A REOTRON MDW 700-350* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 350 A REOTRON MDW 700-450* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 450 A Load Type Resisive/ Induktive Target Value: Storm, Voltage, Power 0…+10 V, DC 0(4)…20 mA Internal keyboard Interface (optional) Profibus-DP, CAN-Bus, DeviceNet, EtherCAT Release Input 24 V, DC, external contact (potential-free) Status update ready , status update power on Relay, changeover contact Relay, changeover contact Display for effective value : Current/Voltage 0…+10 V, DC Betriebstemperatur 0…+45°C Storage/ Transport temperature -10…+70°C Protection class IP 20 * with water cooling
1-Phase Power Controller REOTRON MEW 700
The REOTRON MEW power controllers are predestined for applications in the process industry, especially in thermal engineering systems.
Single-phase Power Controller REOTRON EW 514
The REOTRON EW 514 is a single-phase thyristor power regulator for load currents up to 6 A.
The control electronics are isolated from the mains voltage. The REOVIB 509 is designed for controlling bowl or linear feeders up to 15 A current rating. The output frequency 50Hz/100Hz (60Hz/120Hz) is selected to suit the feeder. In the regulation circuit there is built-in compensation for mains variations.