EMC Filter CNW 101
Single-phase line filters (2 lines, single-stage) Description Recommended filter for interference suppression according to EN 55011, Class A and EN 61800-3, Category C2. Cost-effective filter that, due to its small dimensions and good attenuation values with a single-stage design, is well-suited for direct mounting in the housing of an interference source. The filter is also available as a version with low leakage current as well as a special medical version (without Y-capacitors). Optionally, the filter can also be supplied with overvoltage protection. The connection with insulated flat connectors allows for quick and touch-safe installation. However, versions with other connection options (terminal / stranded wire) are also possible. Benefits small dimensions Quick connection touch-proof if used with insulated spade connectors good damping performance at a low leakage current also available as a medical version or with a lower leakage current optional anti-surge protection UL approval for the complete model range – E217177 (not for N- and MED-versions) Typical Applications Switch-mode power supplies for industrial electronics, telecommunications, data systems engineering and DC applications. Technical Data According to: IEC/EN 60939 / IEC 950 / UL 1283 Test voltage: L-N 2100 V, DC 1s, L/N-PE 2700 V, DC 1s Overload: 1.5 x I 1 min/h Climate category: DIN IEC 68 Part 1 25/085/21 Type Nominal voltage [V] Nominal current [A] Leakage current [mA] Cx [μF] Cy nF] L [mH] R [kOhm] CNW 101/3 250 3 <3,5 0,94 20 3,3 560 CNW 101/6 250 6 <3,5 0,94 20 1,8 560 CNW 101/10 250 10 <3,5 0,94 20 1,8 560 CNW 101/16 250 16 <3,5 0,94 20 1,2 560 CNW 101/20 250 20 <3,5 0,94 20 1,0 560 CNW 101/3/N 250 3 <0,5 0,94 20 3,3 560 CNW 101/6/N 250 6 <0,5 0,94 20 1,8 560 CNW 101/10/N 250 10 <0,5 0,94 20 1,8 560 CNW 101/16/N 250 16 <0,5 0,94 20 1,2 560 CNW 101/20/N 250 20 <0,5 0,94 20 1,0 560 CNW 101/3/MED 250 3 <0,005 0,94 – 3,3 560 CNW 101/6/MED 250 6 <0,005 0,94 – 1,8 560 CNW 101/10/MED 250 10 <0,005 0,94 – 1,8 560 CNW 101/16/MED 250 16 <0,005 0,94 – 1,2 560 CNW 101/20/MED 250 20 <0,005 0,94 – 1,0 560 Dimensions in mm Type Connection /PE-Connection B [mm] D [mm] H [mm] L1 [mm] L2 [mm] L3 [kOhm] CNW 101/3 Flat plug 6,3×0,8 45 4,2 30 70 60 52 CNW 101/6 Flat plug 6,3×0,8 45 4,2 30 70 60 52 CNW 101/10 Flat plug 6,3×0,8 50 5,3 30 85 75 65 CNW 101/16 Flat plug 6,3×0,8 50 5,3 30 85 75 65 CNW 101/20 Flat plug 6,3×0,8 50 5,3 30 85 75 65 Datasheet All data and configurations can be found in our product datasheet. Download Datasheet Certifications