shop

Contact

CONTACT UND PRODUCT INQUIRY

We are there for you

Do you have questions, requests or suggestions?
Please don’t hesitate to contact us:

REO Inductive Components FZCO

Warehouse FZS2AC04
Jebel Ali Free Zone
Jebel Ali South
Dubai

United Arab Emirates

E-Mail: info@reo-middle-east.com

Passive Current transformer Series IN-B

For the high demands of railway and industrial engineering at higher frequencies up to 50kHz…

ED 1/16

The switch-on current limiter ED 1/16 enables the direct switching on of single-phase transformers, without triggering upstream safety devices…

Active Current transformer Series WKO-2C-B

The current transducer WKO-2C-B with hall effect elements…

HARMONICFILTER CNW 957

LCL filters are used especially in regenerative converters (AFE), but also…

Active Current transformer Series WDI

The WDI current sensor is an open loop current transformer designed for measuring direct and alternating currents…

Leakage transformer NTT 500

In railway applications, where it‘s about the greatest possible comfort and safety of passengers…

DV/Dt – Choke CNW M 833

Reduce voltage rice to < 500V/µs - electrical consumrs and insulation will protected with low costs...

Motor choke CNW M 854

Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

DV/Dt -Choke N CNW 806

Reduce voltage rice to < 500V/µs – electrical consumrs and insulation will protected with low costs…

Sinusoidal filter CNW 961

The REO Sinusfilter Plus++ enables to suppress interference not only on line cables to the motor but also to earth conductors…

DC-Link choke N CNW 892

Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link current and to reduce mains harmonics in voltage source inverters….

Sinusoidal filter N CNW 933

Sinusoidal output current – save costs and trouble-free operation…

EMC-Filter CNW 101

Recommended filter for suppressing interference according to EN 55011, Class A and EN 61800-3, category C2…

EMC-Filter CNW 102

Recommended filter for suppressing interference according to EN 55011, Class A and EN 61800-3, category C2…

EMC-Filter CNW 304

By using a mains choke the upper harmonics are reduced and the starting current is limited…

Contact

CONTACT UND PRODUCT INQUIRY

We are there for you

REO Inductive Components FZCO

Newsletter subscription

Passive Current transformer Series IN-B For the high demands of railway and industrial engineering at higher frequencies up to 50kHz…

ED 1/16 The switch-on current limiter ED 1/16 enables the direct switching on of single-phase transformers, without triggering upstream safety devices…

Active Current transformer Series WKO-2C-B The current transducer WKO-2C-B with hall effect elements…

HARMONICFILTER CNW 957 LCL filters are used especially in regenerative converters (AFE), but also…

Active Current transformer Series WDI The WDI current sensor is an open loop current transformer designed for measuring direct and alternating currents…

Leakage transformer NTT 500 In railway applications, where it‘s about the greatest possible comfort and safety of passengers…

DV/Dt – Choke CNW M 833 Reduce voltage rice to < 500V/µs - electrical consumrs and insulation will protected with low costs...

Motor choke CNW M 854 Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

DV/Dt -Choke N CNW 806 Reduce voltage rice to < 500V/µs – electrical consumrs and insulation will protected with low costs…

Sinusoidal filter CNW 961 The REO Sinusfilter Plus++ enables to suppress interference not only on line cables to the motor but also to earth conductors…

DC-Link choke N CNW 892 Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link current and to reduce mains harmonics in voltage source inverters….

Sinusoidal filter N CNW 933 Sinusoidal output current – save costs and trouble-free operation…

EMC-Filter CNW 101 Recommended filter for suppressing interference according to EN 55011, Class A and EN 61800-3, category C2…

EMC-Filter CNW 102 Recommended filter for suppressing interference according to EN 55011, Class A and EN 61800-3, category C2…

EMC-Filter CNW 304 By using a mains choke the upper harmonics are reduced and the starting current is limited…

Contact

CONTACT UND PRODUCT INQUIRY

We are there for you

REO Inductive Components FZCO

Newsletter subscription

Passive Current transformer Series IN-B

For the high demands of railway and industrial engineering at higher frequencies up to 50kHz…

ED 1/16

The switch-on current limiter ED 1/16 enables the direct switching on of single-phase transformers, without triggering upstream safety devices…

Active Current transformer Series WKO-2C-B

The current transducer WKO-2C-B with hall effect elements…

HARMONICFILTER CNW 957

LCL filters are used especially in regenerative converters (AFE), but also…

Active Current transformer Series WDI

The WDI current sensor is an open loop current transformer designed for measuring direct and alternating currents…

Leakage transformer NTT 500

In railway applications, where it‘s about the greatest possible comfort and safety of passengers…

DV/Dt – Choke CNW M 833

Reduce voltage rice to < 500V/µs - electrical consumrs and insulation will protected with low costs...

Motor choke CNW M 854

Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

DV/Dt -Choke N CNW 806

Reduce voltage rice to < 500V/µs – electrical consumrs and insulation will protected with low costs…

Sinusoidal filter CNW 961

The REO Sinusfilter Plus++ enables to suppress interference not only on line cables to the motor but also to earth conductors…

DC-Link choke N CNW 892

Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link current and to reduce mains harmonics in voltage source inverters….

Sinusoidal filter N CNW 933

Sinusoidal output current – save costs and trouble-free operation…

EMC-Filter CNW 101

Recommended filter for suppressing interference according to EN 55011, Class A and EN 61800-3, category C2…

EMC-Filter CNW 102

Recommended filter for suppressing interference according to EN 55011, Class A and EN 61800-3, category C2…

EMC-Filter CNW 304

By using a mains choke the upper harmonics are reduced and the starting current is limited…