Chokes

Contact

CONTACT UND PRODUCT INQUIRY

We are there for you

Do you have questions, requests or suggestions?
Please don’t hesitate to contact us:

REO Inductive Components FZCO

Warehouse FZS2AC04
Jebel Ali Free Zone
Jebel Ali South
Dubai

United Arab Emirates

E-Mail: info@reo-middle-east.com

Motor choke N CNW 854

Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

Mains choke N CNW 901
Power Noise Reduction – save up to 20% energy costs….

Choke NTT LD-DH 100

The current limiting inductor limits the short-circuit…

Test choke NPT 8929

These chokes are used in test laboratories as load chokes.

Test choke RPD 9039

Drive inverters or output filters must be tested at rated current by using typically motor-generators.

LIQUID-COOLED CHOKE NTT MD 953

Watercooled chokes are available are available with ingress protection ratings IP00 to IP65. REO can…

HARMONICFILTER CNW 897

The filter is designed for the reduction of the THD (Total Har-monic Distortion) when used with B12…

HARMONICFILTER CNW 999

Reactive Power and harmonics compensation equipment; Protection of capacitors…

DC-Link choke N CNW 891

Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link…

Buck converter choke NTT AMCC 400

As a passive inductive component in power supplies and in power electronics, the buck-converter choke is …

Buck converter choke NTT UI114-50

s a passive inductive component in power supplies and in power electronics, the buck-converter choke is…

Sinusoidal filter CNW 932
Reduce grid disturbances – Save up to 15% on energy costs…

Individual solutions

Are you looking for an individual solution? No problem! Our REO experts will be happy to answer any questions you may have.

Air choke LD 200

Air chokes are particularly used where high inductive linearity is required…

Air choke LD 210

Air chokes are particularly used where high inductive linearity is required…

Air choke LD 120

Air chokes are particularly used where high inductive linearity is required…

Mains choke N CNW 903

Power Noise Reduction – save up to 20% energy costs…

Mains choke N CNW 905

Power Noise Reduction – save up to 15% energy costs…

Test choke NPT 8919

These chokes are used in test laboratories as load chokes…

Test choke NPT 892

Switches must be pass many different tests during the approval phase.

HARMONICFILTER CNW 957

LCL filters are used especially in regenerative converters (AFE), but also…

DV/Dt – Choke CNW M 833

Reduce voltage rice to < 500V/µs - electrical consumrs and insulation will protected with low costs...

Motor choke CNW M 854

Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

DV/Dt -Choke N CNW 806

Reduce voltage rice to < 500V/µs – electrical consumrs and insulation will protected with low costs…

Sinusoidal filter CNW 961

The REO Sinusfilter Plus++ enables to suppress interference not only on line cables to the motor but also to earth conductors…

DC-Link choke N CNW 892

Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link current and to reduce mains harmonics in voltage source inverters….

Sinusoidal filter N CNW 933

Sinusoidal output current – save costs and trouble-free operation…

Sinusoidal filter CNW 931

Smoothing of the current and voltage in order to realize long connecting paths…

Air choke LD 110

Air chokes are particularly used where high inductive linearity is required.

Air choke LD 100

Air chokes are particularly used where high inductive linearity is required.

Contact

CONTACT UND PRODUCT INQUIRY

We are there for you

REO Inductive Components FZCO

Newsletter subscription

Motor choke N CNW 854 Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

Mains choke N CNW 901Power Noise Reduction – save up to 20% energy costs….

Choke NTT LD-DH 100 The current limiting inductor limits the short-circuit…

Test choke NPT 8929 These chokes are used in test laboratories as load chokes.

Test choke RPD 9039 Drive inverters or output filters must be tested at rated current by using typically motor-generators.

LIQUID-COOLED CHOKE NTT MD 953 Watercooled chokes are available are available with ingress protection ratings IP00 to IP65. REO can…

HARMONICFILTER CNW 897 The filter is designed for the reduction of the THD (Total Har-monic Distortion) when used with B12…

HARMONICFILTER CNW 999 Reactive Power and harmonics compensation equipment; Protection of capacitors…

DC-Link choke N CNW 891 Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link…

Buck converter choke NTT AMCC 400 As a passive inductive component in power supplies and in power electronics, the buck-converter choke is …

Buck converter choke NTT UI114-50 s a passive inductive component in power supplies and in power electronics, the buck-converter choke is…

Sinusoidal filter CNW 932Reduce grid disturbances – Save up to 15% on energy costs…

Individual solutions Are you looking for an individual solution? No problem! Our REO experts will be happy to answer any questions you may have.

Air choke LD 200 Air chokes are particularly used where high inductive linearity is required…

Air choke LD 210 Air chokes are particularly used where high inductive linearity is required…

Air choke LD 120 Air chokes are particularly used where high inductive linearity is required…

Mains choke N CNW 903 Power Noise Reduction – save up to 20% energy costs…

Mains choke N CNW 905 Power Noise Reduction – save up to 15% energy costs…

Test choke NPT 8919 These chokes are used in test laboratories as load chokes…

Test choke NPT 892 Switches must be pass many different tests during the approval phase.

HARMONICFILTER CNW 957 LCL filters are used especially in regenerative converters (AFE), but also…

DV/Dt – Choke CNW M 833 Reduce voltage rice to < 500V/µs - electrical consumrs and insulation will protected with low costs...

Motor choke CNW M 854 Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

DV/Dt -Choke N CNW 806 Reduce voltage rice to < 500V/µs – electrical consumrs and insulation will protected with low costs…

Sinusoidal filter CNW 961 The REO Sinusfilter Plus++ enables to suppress interference not only on line cables to the motor but also to earth conductors…

DC-Link choke N CNW 892 Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link current and to reduce mains harmonics in voltage source inverters….

Sinusoidal filter N CNW 933 Sinusoidal output current – save costs and trouble-free operation…

Sinusoidal filter CNW 931 Smoothing of the current and voltage in order to realize long connecting paths…

Air choke LD 110 Air chokes are particularly used where high inductive linearity is required.

Air choke LD 100 Air chokes are particularly used where high inductive linearity is required.

Contact

CONTACT UND PRODUCT INQUIRY

We are there for you

REO Inductive Components FZCO

Newsletter subscription

Motor choke N CNW 854

Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

Mains choke N CNW 901
Power Noise Reduction – save up to 20% energy costs….

Choke NTT LD-DH 100

The current limiting inductor limits the short-circuit…

Test choke NPT 8929

These chokes are used in test laboratories as load chokes.

Test choke RPD 9039

Drive inverters or output filters must be tested at rated current by using typically motor-generators.

LIQUID-COOLED CHOKE NTT MD 953

Watercooled chokes are available are available with ingress protection ratings IP00 to IP65. REO can…

HARMONICFILTER CNW 897

The filter is designed for the reduction of the THD (Total Har-monic Distortion) when used with B12…

HARMONICFILTER CNW 999

Reactive Power and harmonics compensation equipment; Protection of capacitors…

DC-Link choke N CNW 891

Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link…

Buck converter choke NTT AMCC 400

As a passive inductive component in power supplies and in power electronics, the buck-converter choke is …

Buck converter choke NTT UI114-50

s a passive inductive component in power supplies and in power electronics, the buck-converter choke is…

Sinusoidal filter CNW 932
Reduce grid disturbances – Save up to 15% on energy costs…

Individual solutions

Are you looking for an individual solution? No problem! Our REO experts will be happy to answer any questions you may have.

Air choke LD 200

Air chokes are particularly used where high inductive linearity is required…

Air choke LD 210

Air chokes are particularly used where high inductive linearity is required…

Air choke LD 120

Air chokes are particularly used where high inductive linearity is required…

Mains choke N CNW 903

Power Noise Reduction – save up to 20% energy costs…

Mains choke N CNW 905

Power Noise Reduction – save up to 15% energy costs…

Test choke NPT 8919

These chokes are used in test laboratories as load chokes…

Test choke NPT 892

Switches must be pass many different tests during the approval phase.

HARMONICFILTER CNW 957

LCL filters are used especially in regenerative converters (AFE), but also…

DV/Dt – Choke CNW M 833

Reduce voltage rice to < 500V/µs - electrical consumrs and insulation will protected with low costs...

Motor choke CNW M 854

Voltage rise (<200V / us) and distortion reduce - protect electrical consumers optimally...

DV/Dt -Choke N CNW 806

Reduce voltage rice to < 500V/µs – electrical consumrs and insulation will protected with low costs…

Sinusoidal filter CNW 961

The REO Sinusfilter Plus++ enables to suppress interference not only on line cables to the motor but also to earth conductors…

DC-Link choke N CNW 892

Power Noise Reduction – save energy costs. The DC-link choke is used for smoothing the DC link current and to reduce mains harmonics in voltage source inverters….

Sinusoidal filter N CNW 933

Sinusoidal output current – save costs and trouble-free operation…

Sinusoidal filter CNW 931

Smoothing of the current and voltage in order to realize long connecting paths…

Air choke LD 110

Air chokes are particularly used where high inductive linearity is required.

Air choke LD 100

Air chokes are particularly used where high inductive linearity is required.