LIQUID COOLING

optimal temperature behavior with better performance and longer product life

LIQUID COOLING

Air cooled systems often have limitations, especially when the components must be compact. To guarantee efficient cooling, REO has developed a wide range of inductive and resistive components designed to be water cooled.

The use of a water cooling system allows optimal temperature characteristics to be utilised. In addition, the performance and lifetime of the component is improved. In the graphic on the right side you can see – recorded by a thermal imaging camera – the cooling performance of a water-cooled braking resistor. The entire body of the component is utilised in the cooling process.

The higher investment costs for water cooling technology are offset by a variety of advantages when compared with a air cooling based system:

  • high efficiency and low noise level
  • space requirements are reduced up to 70%
  • extremely effective cooling in high ambient temperatures
  • very low housing temperature
  • extended service life with normal operation
  • consistently high performance, as dissipated heat is removed directly
  • only method that permits cooling below the ambient air temperature
  • ideally suited for industrial applications in which modules with low surface temperatures are required (wood and textile processing or in ATEX areas)

The REO experts will be happy to answer any questions you may have at any time.

REO – technology, security and reliability


Analysis and test methods

REO products only leave our premises with absolute assurance of quality and performance. In this way, we ensure a consistent quality…


EDGE-WINDING

REO continues to advance the use of EDGE-WINDING technology with the introduction of the latest generation of N CNW choke and filter series…


LIQUID COOLING

Deal cooling even when under full load for prolonged periods – our liquid-cooled systems enable you to focus on…


IIOT-Ready

Industry 4.0 is the strategy for comprehensive digitalisation of industrial production…


MEASUREMENTS

Quality assurance is top priority at REO. That is why we keep test fields at all our locations worldwide…


MPS-Protective cover

To provide the necessary outdoor protection our components are finished with…


REOVIB 2.0

At the start of the REOVIB 2.0 project, our development goal was as singular as it was ambitious: We will launch the world’s most…


IP PROTECTION RATING

REO is able to provide a wide range of products with Ingress Protection to IP65…


SIMULATIONS

In order to save material and to shorten development times, so ultimately minimize costs, we use the latest computer and…


CASTING TECHNOLOGY

When electrical components are used in environments where powerful external influences may occur reliable…