DC-Link choke CNW 891

Single-phase DC-link choke (1 lines)


Complete catalog

Download our extensive catalog and discover many other REO products.

Data sheet

All data and configurations can be found in our product data sheet.

DC-Link choke CNW 891

Single-phase DC-link choke (1 lines)

Description

Power Noise Reduction – save energy costs.

The DC-link choke is used for smoothing the DC link current and to reduce mains harmonics in voltage source inverters.

The typical combinations of rectifiers and capacitors strains the supply network significantly. For functional reasons, the current consumption of the power supply or the inverter is not sinusoidal but pulsed at the moment of maximum voltage. DC-link chokes reduce the harmonics and relieve the supply network similar to the mains choke. In addition, the DC-link choke attenuates charging current peakssurges of the DC-link capacitors. By using a DC-link choke the supply network is less burdened with harmonic reactive power.

Improvement of the efficiency of a converter (Power Factor Correction). Starting currents and current peak are attenuated up to 70%. Mains chokes help to comply with international power quality standards IEEE 519 or EN 61000-3-2.

Typical applications

Drive systems for motor drives:
Mechanical engineering, Elevators / escalators, Pipes, Conveyor technology, Ventilation and air conditioning, Robotics, Automation technology

Power supplies, Wind turbines

Advantages

  • Reduction of harmonic harmonics
  • Attenuation of current peaks up to 70%
  • compact design
  • Advantages compared to the mains choke:
    • smaller size
    • Advantages compared to the mains choke:
    • Lower material costs / price
    • lower power dissipation
  • Production according to UL insulation system E251513 possible

Technical specifications

  • Nominal voltage: U ≤ 600 V
  • Compliant: EN 60289 / EN 61558
  • Test voltage: L-PE 4000 V, AC/50Hz, 60s
  • Insulation class: T40/F
  • Ingress protection class: IP00
  • Climate category: DIN IEC 60068-1
  • Overload: 1.5 x INominal 1 min / h
  • Type of construction: standing on foot angle

Dimensions in mm


Reactive Power and harmonics compensation...

Power Noise Reduction – save...